Linda Connelly Enamels

Tag: handmade

  • Getting Started and the Design Process

    Getting Started and the Design Process

    This morning’s blog post by Grace Marshall http://grace-marshall.com/starting-badly/ really resonated with me and I have to share it because it is a problem familiar to most artists and designers. I had a design to do for a client that was a little out of my comfort zone. I did some preparatory sketches some time ago and it has been sitting waiting for me to get back to it. A few weeks ago I spent some time on Pinterest making a board to help whilst I was sitting watching telly one evening. I was ready to start but whenever I have some time, somehow I always found something else to do, like actually making something in my studio. Mother’s Day afternoon was a perfect opportunity. It was wet and dismal so husband and I divided the dining room table in half. He did what he wanted to do on one half, and I set myself up with pens, pencils and the chocolates my son had bought me. As I always tell my students, starting is the hardest thing. It is so true. I had been putting it off until I could see the finished design in my mind but it wasn’t happening. I needed to actually work through things with paper and pens to get to where I wanted to be.

    To start with, I sketched elements that were troubling me from the inspiration board on Pinterest that I had made. I did this from my iPad. Then I incorporated elements into drawings I had already made. When I work on designs I repeatedly trace them, incorporating changes each time. This time I used the scanner on my printer which saved a lot of time as I just needed to draw on top of the last print and then trace that and repeat the process. Over the course of the afternoon the design evolved into something I am really pleased with. I also used the scanner on my printer to change the size. Eventually I was pleased with my design and I could add colour. I feel such a sense of achievement! I can’t wait to show my client. Hope she likes it. Let me know how you get over the problem when you are stuck. I would love to know and perhaps we can learn from each other.

  • New Ammonite ‘Fossil’ Pendants

    New Ammonite ‘Fossil’ Pendants

    I have been working on some new ‘statement’ Ammonite ‘Fossil’ necklaces that I would like to share with you. The enamels have been created using Sgraffitto techniques. They are all on copper and I have set them in silver, sometimes with the addition of 18ct gold prongs.  Hope you like them.

    Small Turquoise Enamel ‘Fossil’ set in Silver bezel

    • Hand-made silver clasp
    • Matt Turquoise Beads on hand knotted silk
    • Enamel is approximately 45mm x 40mm
    • Length of necklace is approximately 48 cm
    Turquoise Enamel Ammonite Fossil with Turquoise Beads
    Turquoise Enamel Ammonite Fossil with Turquoise Beads

    Turquoise-Fossil-with-Knotted-Turquoise-beads-2 Turquoise-Fossil-with-Knotted-Turquoise-beads-3

     

    Large Orange Enamel’ Fossil’ with 18ct gold prong setting on sterling silver

    • Hand-made silver clasp, bail and chain
    • Matt ‘Dragon Skin’ beads
    • Enamel is approximately 65mm x 55mm
    • Length of necklace is approximately 68mm
    Orange Ammonite Fossil Necklace with Dragon Skin Beads
    Orange Ammonite Fossil Necklace with Dragon Skin Beads

    Orange-Fossil-with-Dragon-Skin-Beads-and-chain-2 Orange-Fossil-with-Dragon-Skin-Beads-and-chain-3

    Large Blue Enamel ‘Fossil’ with 18ct gold prong setting on sterling silver

    • Hand-made silver clasp and bail
    • Matt Agate beads on hand knotted silk
    • Enamel is approximately 65mm x 55mm
    • Length of necklace is approximately 50mm
    Blue Ammonite Fossil Necklace with Agate Beads
    Blue Ammonite Fossil Necklace with Agate Beads

    Blue-Fossil-with-Knotted-Agate-Beads-2 Blue-Fossil-with-Knotted-Agate-Beads-3

    Large Turquoise Enamel ‘Fossil’ set in silver bezel

    • Hand-made silver clasp and chain
    • Turquoise beads
    • Enamel is approximately 65mm x 55mm
    • Length of necklace is approximately 68mm
    Large Turquoise Ammonite Fossil with Turquoise Beads
    Large Turquoise Ammonite Fossil with Turquoise Beads

    Turquoise-Fossil-with-Turquoise-beads-and-Coil-Links Turquoise-Fossil-with-Turquoise-beads-and-Coil-Links-2

  • Cloisonné Enamel – The Making of my New Magic Carpet Pendant

    Cloisonné Enamel – The Making of my New Magic Carpet Pendant

    Cloisonné Enamel – The Making of my New Magic Carpet Pendant

    Cloisonné enamel is where fine wires are embedded in the enamel to create the design. There are a lot of different stages involved in making a piece using this technique and I decided to use my new Nimbus Cloud Dome to take pictures of the making of my new ‘Magic Carpet’ inspired Cloisonné enamel piece.

    20140207-165052.jpg
    This shows the wires laid onto the base. In this case I am using fine silver foil on a copper base. I have used Soyer Silver flux over the foil and fired that before starting to add the wires. I have used fine silver and fine gold wires. They were fired into place in two separate firings as the design was too complicated to do all in one. I use Kyre-fire to hold the wires in place to go into the kiln.

    20140207-165743.jpg
    This shows the first layer of colour fired into place. I have used a light blue under where the pink will go. I find that this helps the pink to fire a better colour.

    20140207-165924.jpg
    This shows the second layer of colour that has been wet laid into the cells before it is fired. It is quite tricky where the design is complex to keep the colours separate. A good light and  the right glasses are essential!

    20140207-170135.jpg
    Here the second layer has been fired. I am really pleased with the pink particularly.

    20140207-170348.jpg
    Here I have added fine gold foils and painted oxides to the design. After firing I will then complete the enamelling with two layers of Blythes Medium flux. The two layers will be fired separately. If you apply it too thick it tends to go cloudy and obscure the colours. After the last firing I use a fine diagrit to rub all over the enamel to remove any excess. The aim is to achieve a level surface with no high spots or depressions. The latter show up as a shiny patch amid an otherwise matte surface. If necessary, I add more medium flux and refine and then repeat this stage. When all is flat and perfect I use a succession of wet and dry paper with lots of water to achieve a soft eggshell finish. I use Renaissance Wax to seal the surface and to protect it.

    20140207-170619.jpg
    This is the finished piece before setting. There are hours of work involved to get to this stage.

    20140207-171142.jpg

    The completed Cloisonné Enamel ‘Magic Carpet’ inspired enamel set in a sterling silver surround.

  • Thursday Tip – Carefree Lustre Part 1

    Thursday Tip

    Welcome to the latest in a series of articles to do with enamelling and making jewellery. I hope you find them useful. I am writing about issues and problems I have experienced (and hopefully overcome), and tips and shortcuts concerning enamelling and making jewellery that I have come across in the course of the past twenty years or so. In this post I am going to tell you one of the ways I use Carefree Lustre in my enamelling.

    Carefree Lustre

    I like to add touches of gold to a lot of my enamels, just to add a little ‘twinkle’. I used to use precious metal essence. This is  very expensive and also very tricky to use. Recently I have been using Carefree Lustres and have been very pleased with the results. I buy mine from Enamelsupply.com. For those members of Guild of Enamellers who are coming to conference in April, Tom Lumsden will be attending and will bring small orders with him so saving on postage!

    Using Gold Carefree Lustre – Part 1

    Enamel on copper badge with gold Carefree Lustre detail
    Enamel on copper badge with gold Carefree Lustre detail

     


    I often like to add painted line detail using this. I take a little in a tiny pallet and using an eye dropper I add a drop of Klyre Fire and mix it. Using a fine brush I paint it on quite thickly. The surface needs to be free from grease and if it is ‘balling up’, I clean the surface with a cotton bud dipped in methylated spirit. The Carefree Lustre dries very quickly. When dry you can neaten lines by scratching back with a cocktail stick and blowing away the dust. I fire in a very hot kiln, around 950 – 1000 for 30 seconds. I then check it. There will probably be some dust still on the surface that will rub off but underneath should be fired. If necessary I return it to the kiln for another 20 seconds. It is very easy to over-fire and for it to burn out. Applying it in a thick layer gives you a little leeway. I keep the pallet in a resealable plastic bag and reconstitute it as required with a little more Carefree lustre and Kyre fire. If it is very hot where I am working, sometimes I might add a drop or two of water.

    Note: After I wrote this I acquired a Digital kiln. I have just tried firing for 1 minute at 900 and this worked well. I may try shortening the period to say 50 seconds another time.

    This is one way I use Carefree Lustre. I hope you find it useful and will have a go adding  Carefree Lustre detail to your enamels.

  • Reuseable Stencils for Enamelling

    Reuseable Stencils for Enamelling

    Thursday Tip

    Welcome to the latest in a series of articles to do with enamelling and making jewellery. I hope you find them useful. I am writing about issues and problems I have experienced (and hopefully overcome), and tips and shortcuts concerning enamelling and making jewellery that I have come across in the course of the past twenty years or so. In this post I am going to tell you about how I make reusable stencils for use in my enamelling.

    Reusable Stencils for Enamelling

    There are many different materials you can make stencils from. My favourite is to use Transparent Film similar to that used for OHP slides. They are perfect as they are not too thick and are perfectly flat. Sometimes though I use the transparent windows you get on packaging. The main advantage of this material is that it is reusable an infinite number of times and is of course waterproof.

    Making Reusable Stencils

    I trace my design onto tracing paper with a fine pen. I then stick this tracing onto my transparent film. Then I cut out the shapes with either fine decoupage scissors of a scalpel and a cutting mat. You finish up with both positive and negative shapes that you can use at different stages. I make little tabs of sellotape to make them easier to pick up cleanly. If there are a lot of very similar pieces like the windows on my Brighton Pavilion Clock, I number them.

    [singlepic id=8 w=320 h=240 mode=watermark float=center]

    Using Reuseable Stencils

    I spray the surface with a very fine spray of water. Not too much as you don’t want to flood it. Then I place my stencils carefully into position. The thin film of water hold them in place. Then I sift my chosen colours into place. With very fine point tweezers, carefully lift your stencils. With the larger ones it often helps to hold the piece at an angle so any stray enamel doesn’t fall in the wrong place. Dry carefully and fire. I put the tiny stencils into glass pots to dry so all the enamel falls off. they can then be reused. I hope you find this Tip useful to enable you to make reusable stencils for enamelling. Let me know how you get on.

  • Tip For Annealing Metal

    Tip For Annealing Metal

    Thursday Tip

    Welcome to the latest in a series of articles to do with enamelling and making jewellery. I hope you find them useful. I am writing about issues and problems I have experienced (and hopefully overcome), and tips and shortcuts concerning enamelling and making jewellery that I have come across in the course of the past twenty years or so. In this post I am going to tell you an easy way to tell when your metal has reached to correct temperature for annealing.

    Annealing Metal

    What is annealing  and why do we need to anneal metal? Annealing is the process of heating metal in order to soften it and make it pliable and able to take on shape and form. After annealing the metal can be worked and shaped. When it starts to harden it must be annealed again. When enamelling, you of course need to shape the metal prior to beginning to enamel.

    How Do We Anneal Metal

    You can choose to anneal in the kiln, however I usually prefer to use a gas torch as it is easier to see when the correct temperature has been reached. You need to heat it to a dull red colour and hold it for a few seconds at that temperature. Depending on the light levels where you are working, it is very difficult to see when the correct temperature has been reached and easy to overdo. I read a wonderful tip in the Guild of Enamellers Journal a few months ago that I have found absolutely brilliant. Draw on your metal in a permanent marker prior to heating. When the metal reaches the correct annealing temperature, the line will disappear. Stop heating at this point and quench in water. I usually like to quickly check with my fingers to see if the metal flexes before I pickle it. I have used this technique quite a bit now and have found it to be successful in both silver and copper. Recently I have been working on copper shim. I draw my design on it before I emboss it.  This is an example of a trial piece for my new Magic Carpet Wall Panels I am planning.

    [singlepic id=111 w=320 h=240 mode=watermark float=center]

    I anneal the worked copper shim after embossing with the added bonus that my marker lines disappear. I have been using a Staedtler Permanent Lumocolor pen that has a nice thin nib. Take care not to use a pigment ink pen as although they will mark the metal, the line doesn’t disappear when it is heated. See here for my Handbag Vessels that I also created using this technique. Have a go and let me know how you get on. I think it makes annealing much easier.

     

  • Wolf Tools Belt Sander

    Wolf Tools Belt Sander

    Welcome to the latest in a series of articles to do with enamelling and making jewellery. I hope you find them useful. I am writing about issues and problems I have experienced (and hopefully overcome), and tips and shortcuts concerning enamelling and making jewellery that I have come across in the course of the past twenty years or so.

    Wolf Tools Belt Sander

    [singlepic id=35 w=320 h=240 mode=watermark float=center]

    This was delivered by Father Christmas and is proving to be a wonderful addition to my tools. it connects to my Foredom Pendant Motor. It comes with a selection of belts and I am currently using it to sand the bottoms of silver bezels I am making prior to soldering them to a base plate. It is much quicker than sanding them be hand, and they seem to stay in shape much better. It will also be invaluable when I want to solder press-formed shapes together. I always found sanding their bottoms very tedious and I think this will really speed things up. Sutton Tools are the stockist for the UK. What is really interesting is that you can purchase Diamond Belts which I think will be ideal for finishing enamels on a small scale. With the foot control you have a lot of control over speed and of course the necessary water would be well away from the motor. Unfortunately they are not available in the UK, but RioGrande in the States do stock them and a friend who is on holiday there is going to bring some back for me. Can’t wait to have a go. If you have any experience of using this tool, I would love to hear from you.

  • Using Liquid Enamel

    Using Liquid Enamel

    Welcome to the latest in a series of articles to do with enamelling and making jewellery. I hope you find them useful. I am writing about issues and problems I have experienced (and hopefully overcome), and tips and shortcuts concerning enamelling and making jewellery that I have come across in the course of the past twenty years or so.

    An Easy Way to Prepare Liquid Enamel for Use

    I use Liquid Enamel from WG Ball. It comes in tubs in a good variety of colours, ready mixed in water. It is of course unleaded as are all liquid enamels. Although it is very convenient being ready mixed, it still always needs a good stir as all the enamel sinks to the bottom very quickly. It needs to be well mixed before every use, even if in the same session. If it is very solid, I start off with a stainless steel stirrer. Then I use a battery operated whisk that they sell in cook shops for whisking milk for milk shakes. It works brilliantly and is much quicker to do a thorough job. After use I just plunge it in a tub of clean water and whisk again to remove all the enamel and leave it clean for the next use. I find this saves me lots of time. I hope you find it useful too.

  • Filling Holes in a Ready Made Copper Blank

    Filling Holes in a Ready Made Copper Blank

    Welcome to the latest in a series of articles to do with enamelling and making jewellery that I intend to publish. I hope you find them useful. Although I planned to write them weekly, unfortunately I missed a few last year due to sheer pressure of work. Many apologies and My New Year’s resolution is to do much better! I will be writing about issues and problems I have experienced (and hopefully overcome), and tips and shortcuts concerning enamelling and making jewellery that I have come across in the course of the past twenty years or so.

    What to Do When Your Ready Made Copper Blank is Pierced and You Want to Make a Brooch

    I came across this problem this Christmas when I decided to make a range of enamelled owl brooches. I wanted to make them as a stocking filler item and so needed to use a ready made shape. The only one I could find that was suitable came only as a pierced shape. I ordered them anyhow as I knew I could fill the hole with a wire rivet that wouldn’t show after enamelling.

    Making the Rivet to Fill the Hole

    I chose copper wire that was a tight fit in the hole. In this case I used 1.2 mm. I used a saw to cut a short piece approximately 2mm longer than the thickness of the blank. Use a saw instead of wire cutters to end up with a nice, flat cut that you need. Alternatively you could use wire cutters but then you would need to use a file.

    Try your wire for fit, set your blank onto a steel block. Then I use a small, light hammer with a flat face. Tap gently on the wire to spread it a little, turn over and repeat on the other side. Work methodically and you should end up with a neat rivet that is almost invisible. Try not to put hammer marks in the blank itself, although a few light ones probably won’t show. You can continue with emery paper if you wish, although I didn’t find it necessary because I was making was using a riso screen over my surface that completely hid any evidence of the rivet. Have a go. It is useful to be able to do this if you need to. Tomorrow I will get back some of the owls I made and I will post a picture. Let me know how you get on.

  • Mermaid Necklet

    Mermaid Necklet

    Mermaid Necklet

    [singlepic id=106 w=320 h=240 mode=watermark float=]

    I have just entered my Mermaid Necklet in a Facebook competition for ‘Gifts from the Sea’. It is cloisonné enamel on fine silver. It is in a fine silver bezel with sterling silver fronds of seaweed which were cast from a wax model that I made. A single pearl hangs from a loop and it is suspended on a sterling silver chain. The cloisonné uses fine gold and fine silver wires. I have engraved a texture beneath the enamel and around the outside is written in wire the following words: ‘They dwelt in halls of seaweed and shells’. This is inspired by the words of an Enya song. The whole idea came to me when I was swimming off the coast of Crete. We were told that beneath us was the remains of a Roman city. As I swam, I wondered how they knew it was Roman and perhaps it was the Kingdom of the Merfolk.

    ‘Gifts from the Sea’ for me encompasses the myriad of colours and patterns found in fish; the sinuous, sensuous lines of fronds of sea weed; the intricate, exquisite detail of shells and the luscious bounty of the oyster. However, for me the greatest gift is to our imagination in the guise of Merfolk.  I believe that this necklet truly does represent ‘Gifts from the Sea’ in all it’s forms and I hope you like it.